August 20, 2022


Programming Language/Web Design and Development

Build Your Own Pc how to build a computer

The process actually remains the same – you need to research and choose the components that will make up the the PC you’re trying to put together. After all, you want a PC that you can show off with pride. RAM is a sensitive component and, as such, should be handled with care. It’s recommended that contact be avoided with the pins on the underside of each module. The RAM slots on a motherboard are located to the right of the CPU. Do check the motherboard manual as to which RAM slots are to be used, depending on how many sticks you have.

  • The main brands for CPUs are Intel and AMD, and choosing one comes down to which one fits your needs and budget.
  • These screws should be snug but not tight, there is no reason to torque down on them, hand tight is fine, otherwise you can damage the motherboard.
  • You don’t need an optical drive – it’s becoming more and more common for PCs not to have one these days, as a lot of software is now available on USB stick or by download over the internet.
  • Finding the right pc part is now easier with us at PC Builder.
  • The difference results in better speed, efficiency, and durability because small mechanical parts and spinning platters are much more susceptible to physical damage than NAND.
  • This will spread out once your cooler is mounted, and provide a sufficient amount of thermal interface material to successfully transfer heat from the processor die to the cooler of your choosing.

A graphics card, or GPU, a graphical processing unit, is an expansion card that fits into the PCIe slot on your motherboard. It handles complex graphical instructions, computing images, textures and objects, and sends the result to one or more monitors. Your motherboard may have HDMI, DisplayPort, or older DVI or VGA ports, driven by the integrated graphics GPU inside some processors. It handles basic desktop applications just fine, but it’s nowhere near the performance of a dedicated graphics card to game at the highest FPS and with details cranked to the max.

To build a computer, start by grounding yourself with an antistatic wrist-strap cable to prevent electrostatic discharge. Next, open the case and install the power supply near the top of the case. Then, attach the processor and RAM to the motherboard, hook it up to the power supply, and attach the heat sink.

Amd Zen 4 raphael Cpu, Plus dragon Range And phoenix Apu Roadmaps

Zip ties are a massive help with managing all the cables inside your rig, and consolidating the cables helps improves airflow. Your files and data are saved long-term on your storage drive. This data is held on either a hard disk drive or solid state drive . Although hard drives generally give you more storage space , SSDs have essentially made them outdated – SSDs are on average 6x faster1 and 90x more energy-efficient2 than hard drives.

If using a newer power supply with an 8-pin EPS 12V connector and a PCI Express 8-pin connector, don’t attempt to force the cables into place. There has never been a better time to build your own PC, but where’s the best place to start? Determining what you want to get out of your new computer is the first step and it guides the rest of the process. When you know what you want from your computer, you’ll know what you need from your hardware, which is the source of your computer’s performance.

Step 16: Credits

No matter what type of storage drive you’re installing, ensure the connection ports are facing towards a cable cut-out inside your chassis as it will make routing cables easier. A motherboard is the first component you’ll want to choose. The motherboard dictates the physical form factor and size of your PC build, but it also determines what other pieces of hardware the computer can use. While you will want to choose your motherboard based on other compatible components, the motherboard should be your starting point.Find out more about RAM and motherboard compatibility. At this point, you need to plug your graphics card into your power supply to give it power. It’s okay if there are parts of the cables that go unused–just make sure every port on the graphics card has part of the cable plugged in.

How To Build A Gaming Pc: A Step

Also make sure that it’s all compatible, and that it will fit inside whatever case you want to build it in. We’ve broken down the process into a series of easy-to-follow steps. From gathering your components to putting on the finishing touches, our guide will walk you through how to easily build a PC.