August 17, 2022


Programming Language/Web Design and Development

How To Build A Cheap Pc With Pictures how to build a computer

Unscrew the rear PCI case brackets that align with the PCI slot you will use. Secure the drive to said bracket using screws or screwless mechanism. Motherboards allow for the CPU, memory, storage, GPU, and all other components to communicate with one another, and the ASUS X570-E Gaming is a great solution. It’s reliable, houses premium parts, has a ton of features, and has a solid UEFI setup that allows you to overclock your system easily.

It’s time to boot up the PC and make sure everything is working fine now that all components are inside the case. You should now be greeted by the BIOS POST screen, asking for an OS to be installed if one is not detected. If you run into problems, it’s time to do a little troubleshooting. With all significant components now installed, it’s time to hook everything up to the power supply and motherboard. Generally speaking, it’s best to start with the power to the motherboard itself. Since memory and storage are a large part of the cost within a new computer, building your own PC gives you a chance to save on these components by adding your own.

Step 7: Install Your Power Supply Psu

As a bonus, it’s straightforward to install a graphics card. We usually leave the GPU until last because of how much space they typically take within the chassis. Fan headers can be located on the motherboard itself, where the 3 pin connectors can be inserted. If everything boots through the BIOS and you see the splash screen, go into the setup by hitting the DEL key as the system cycles. Shut everything down and disconnect all the cables, removing the GPU and placing it back into its protective wrapping.

  • Avoid touching of pressing down on the back of the CPU with your fingers, as any residue from your hands can destroy the heat transfer surface for the cooler which will be mounted next.
  • I have five motherboards, one is shot, one is in use and three are in storage.
  • Double-check alignment, and give the processor a little nudge to make sure that it has slotted in correctly.
  • If you’re a gamer, craving to build your own PC is something that has definitely crossed your mind at least once.

When pressing the RAM into the motherboard mounting slots, you’ll often have to use a fair amount of force to ensure it is seated properly. Some CPU coolers do come with a thermal pad already applied, in which case you can skip step 1. If yours doesn’t, you will need to apply thermal paste to the CPU surface before seating the CPU cooler in position. If you have an aftermarket CPU cooler it may have a back bracket that needs to be fixed to the read of the motherboard. Chances are that you will still be able to re-use your existing computer case, power supply, optical drive, monitor, keyboard, mouse and even operating system (e.g. Windows). In most cases, upgrading a PC will cost you less than half of a new computer’s price.

Step By Step

Be sure to remove and discard this as you install your CPU. Trying to install the motherboard into the case with components like the CPU cooler already mounted to it may be difficult depending on where the motherboard mounts are located. Sometimes you may not be able to fit your screwdriver where it needs to be if other parts like the CPU cooler or RAM get in the way. The documentation that came with your case and motherboard should tell where these connectors are.

Step 2: The Motherboard

AMD also manufactures the 2200G and 2400G processors with powerful integrated graphics, capable of some games at lower settings. If you want a smaller hard drive with faster data retrieval, you can instead purchase a solid state drive . These drives are significantly more expensive than most standard computer hard drives. Often they are used as a complementary drive with a larger hard drive. Even background services and processes, like system updates, can draw from your RAM and that’s why it’s important to have as much memory as possible. To seat the card in that slot, you’ll need to remove one, two, or, in some cases, three rectangular backplates from your case.

With these factors in mind you can pick out the case to fit your style. Selecting a case can be done mostly to personal taste, but there’s a few factors to keep in mind. First, the case needs to have good airflow, so there should be lots of fan mounting spots. Also look for wide openings at the front for air to enter, and having them filtered will help keep dust out of the case. Second, check what size motherboard your case will accept, most motherboards are ATX sized and won’t fit in smaller cases.