It’s time to boot up the PC and make sure everything is working fine now that all components are inside the case. You should now be greeted by the BIOS POST screen, asking for an OS to be installed if one is not detected. If you run into problems, it’s time to do a little troubleshooting. With all significant components now installed, it’s time to hook everything up to the power supply and motherboard. Generally speaking, it’s best to start with the power to the motherboard itself. Since memory and storage are a large part of the cost within a new computer, building your own PC gives you a chance to save on these components by adding your own.
When pressing the RAM into the motherboard mounting slots, you’ll often have to use a fair amount of force to ensure it is seated properly. Some CPU coolers do come with a thermal pad already applied, in which case you can skip step 1. If yours doesn’t, you will need to apply thermal paste to the CPU surface before seating the CPU cooler in position. If you have an aftermarket CPU cooler it may have a back bracket that needs to be fixed to the read of the motherboard. Chances are that you will still be able to re-use your existing computer case, power supply, optical drive, monitor, keyboard, mouse and even operating system (e.g. Windows). In most cases, upgrading a PC will cost you less than half of a new computer’s price.
How To Install Rgb Device
Then, gently place your CPU inside the socket, matching the golden triangle located on the bottom left corner of the processor, with the triangle on the socket bracket. Now that’s done, first find your motherboard’s rear I/O shield, and push it into the rectangular slot in the back of your PC case. Make sure it’s right side up by matching the pattern of cutouts to the arrangement of ports on the back of your motherboard. Secondly, see if your PC case has a large CPU cutout or window cut into the back of the motherboard frame.
- Personally, I like to keep it somewhere safe so I can use it to protect the pins on the motherboard CPU socket in the future in case I want to remove the CPU for upgrade purposes.
- You’ll want to plug the 24-pin ATX and EPS12V cables into their respective spots on both the motherboard and PSU.
- Refer to your case’s manual if you’re having trouble finding them.
- Since memory and storage are a large part of the cost within a new computer, building your own PC gives you a chance to save on these components by adding your own.
- Oh, and by the way, you’re in good hands – we’ve built quite a few PCs and have used our expertise to put together this step-by-step guide so you can build your own in no time.
You can use online PC build simulators such as PC Part Picker or MSI Power Supply Calculator tool to get an estimation of the power required by your build. Make sure to purchase a Power Supply with a little headroom to account for future upgrades. Mount the Power Supply into the chassis and secure it with all the screws.
You Can Custom Build Your Dream Machine
SATA, or Serial ATA, is computer bus is a storage-interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. The SATA host adapter is integrated into almost all modern consumer laptop computers and desktop motherboards. Next up, take your SATA power and connect it to any storage drives. If you happen to have a something mounted onto the front of the case, run this SATA power cable through the PSU shroud, appropriate grommets or holes, and into your front mounted 2.5-inch drive. This is a good opportunity to plug in the SATA Data cables between any storage drives and the motherboard as well.
First, we need to install the I/O shield, a long piece of metal that has cutouts for all the rear ports and connections. This is optional, but recommended accessory helps provide electromagnetic interference protection. Plug the hard drive’s SATA cable into the SATA slot on the motherboard. Attach your power supply to the motherboard’s power connectors.