High temperatures can cause the system to shut down in order to protect important components, and may even cause permanent damage. Fans and heatsinks are therefore necessary in order to keep the CPU running cool. Although building a PC is as easy as putting together a LEGO set, you should know about the building blocks before starting.
So, if it only comes with 1 fan, then your best bet is to place it at the rear to act as an exhaust. Just make sure you get another 120mm fan as an intake later on. Of course, you can reference your manuals, go to the website for the part in question, search forums, etc. Moreover, you might find that the visual aspect of YouTube videos helps you better understand exactly what you are supposed to do. PCPartPicker to check parts compatibility and keep track of your build. If you want to know how to build a computer from scratch, you’ll need at least weeks of preparation ahead.
Honestly, this can be one of the most challenging tasks when building a computer. You have a lot of small cords with sometimes very similar connectors all going to different places. In fact, I still have problems with this from time to time. Installing a liquid CPU cooler follows the general process of installing the mounting plate first before attaching the heatsink onto the CPU.
- Trying to install the motherboard into the case with components like the CPU cooler already mounted to it may be difficult depending on where the motherboard mounts are located.
- You can’t go wrong with an anti-static wrist strap, either – though you can get away with not having one.
- Hold your memory modules on the side to avoid touching the chips and gold pins.
- Bowl – Well, it doesn’t have to be a bowl, per se, but you will need somewhere to put all of the screws you are using during your build.
Be sure to arrange the fan cable so it doesn’t interfere with the spinning of the fan. Take precautions before you start.Static electricity has the potential to damage delicate and expensive components. A very common question is what precautions can be taken and which are necessary. The vast majority of experienced PC builders use grounded wrist straps and similar solutions. They also take basic precautions such as touching a grounded object .A method some builders use is to plug their PSU in and touch it every so often to discharge static. Also, don’t build on carpet and avoid wearing socks or loose fitting clothing.
Step 9: Installing The Operating System And Finishing Up
This step is the most fun, and most challenging part of building your computer. Once you found your budget, head over to PC Part Picker.com and plug in the parts you have chosen. PC Part Picker is a valuable resource that makes sure all of the parts are compatible and will also search the internet’s top electronics stores to find you the best deals. The hardest part after ordering them is waiting for them to show up in the mail.
How To Install The Processor
We recommend using magnetic screwdrivers to easily get into tight places. To be able to build your own desktop PC, you need to have the right tools. In this article, we’ll be covering all the important tools you need– complete with recommendations and tips from our very own PCGuide experienced builders. Finally we have the last piece of the puzzle to slot into place.