September 25, 2022

CAMPLVAD

Programming Language/Web Design and Development

How To Build Your Own Pc In 2021 how to build a computer

Push it down towards the standoff and secure it with the little screw. Independent, transparent, rigorous and authentic, our reviews are the most thorough and honest in PC gaming. Now that your computer is working, you can bring it to where it’ll spend the rest of its life and hook up all of your peripherals for good this time. Breaking the Case, you should already have an idea where the drives should go in your case. You should remember that not all cases have included fans.

Scissors/Cutter – Obviously, you’re going to have to cut a few things here and there as you build your computer. So, make sure you have a pair of scissors/cutter within your reach. Screwdriver – You only need the #2 Phillips screwdriver to do all the work. And if you have an M.2 device, then tag along with you a #0 screwdriver– that’s it.

Am5 Socket Latest Info, Release Date And More

It’s important to get this step right because if you push your case’s power button and its specific cable isn’t plugged in correctly, it won’t be able to start your PC. Some motherboards come with a serial bus that you can plug your case’s cables into before connecting to your motherboard. Installing the power supply into your case is often quite easy. You’ll want to refer to your specific case’s manual for this, but it’s pretty straightforward.

  • Again, your motherboard manual will assist you in making a decision about which slot to use, but usually you should use the topmost PCIe x16 slot for your graphics card .
  • Don’t go wild while tightening as you might damage the board.
  • Even though metal is a good conductor, there can be imperfections on the metal which will reduce conductivity leading to heat being built up in the CPU.
  • It handles basic desktop applications just fine, but it’s nowhere near the performance of a dedicated graphics card to game at the highest FPS and with details cranked to the max.

You can lay it directly on your table, but we personally placed it on top of its box to avoid scratching our desk. You’ll want a tube of thermal paste to keep your CPU’s temperature low during use. Most CPU coolers come with thermal paste already applied, which means you won’t need any extra. However, if you do end up buying a tube of thermal paste, you can clean the cooler’s paste off and use your own.

Step 2: The Motherboard

If you’ve ever shocked yourself from static when touching a metal object, that’s what this is referring to. We get questions all the time from people who have never built a computer before, but it’s really not that difficult as long as you know how. Feel free to skip ahead to your area of interest if you need to, and at the bottom of the infographic you’ll find some more in-depth text explaining each step and key things to look out for.

All of the back ports should fit into the holes in the I/O backplate.Use the screws provided to secure the motherboard to the standoffs through the shielded screw holes on the motherboard. Many expansion cards use the “PCIe 4x” slot, which is much shorter than the full PCIe slot used by video cards. A quick check of your motherboard’s connectivity, and the size of the connector on your card, will make it obvious which slot is appropriate. Find the appropriate connector on your power supply, sometimes labeled VGA, and slot it in. The connector’s design prevents improper installation, so if the connection isn’t easy, double-check your alignment to make sure it’s correct.