This made it easier for us to orient them through the holes in our case to reach our desired spot. Just make sure you don’t over-tighten your zip ties as doing so could damage your cables. If you’re new to building computers, it can also help to have a video to follow along to, so you can actually see what parts go where. If in doubt, refer to the documentation which came with your motherboard, which should tell you exactly where to connect these items. Screws and standoffs are often supplied with your computer case, however sometimes screws may be supplied with a motherboard. By following good practice (I.e. Grounding yourself to remove any static build-up), it’s very unlikely that you’ll have any issues with ESD.
Wear a static wristband or regularly ground yourself by touching a metal part of the case before handling components. Yes, when you want to run that OS you will have to go into the BIOS or boot option menu to tell the computer to boot from a specific hard drive. If you are keeping a hard drive from an old computer, make sure it is compatible with the new parts and try to do a fresh install of the OS to wipe out any bloatware.
- Keep any screws which were supplied with the case separate and take note of the different types.
- Next up thread the cables through the PSU slot in the back of the case first, and then slide the PSU into place, securing the bracket back onto the chassis.
- The USB should load and you can proceed with installation.
- If you hold it just above the slot and the two line up, it’s facing the right direction.
Manage the cables.Now things get more fiddly as we begin cabling. First sort out front panel connections before moving on to installing the power supply within the case to keep clutter to a minimum. These steps will allow you to know whether the computer will boot correctly before you place it into the case. Hard Drives – if you use IDE, find the IDE port on the motherboard and the hard drive. They look exactly the same on the hard drive as they do on the motherboard.
Installing a CPU cooler differs depending on the cooler you’re using, so for specific instructions, please refer to the manufacturer’s manual or support site. Here are some simple instructions that apply to almost every cooler. Do this by gently pushing down on the load arm and moving it out sideways from under the hook, and then raising it up all the way. The hook’s lever action opens the plate, which you can easily flip up. The process isn’t designed to be difficult, and as long as you follow the instructions clearly and keep an eye out to ensure the chip is fully seated before you clamp it in place, you’ll be fine. However, there are some subtle differences in the process depending on who made your CPU.
Step 7: Install Graphics Card
If you need additional help, we have a detailed guide on how to install a graphics card that provides additional information. Not every system needs a dedicated graphics card , but for most gaming PCs, it’s a necessity. Install the retaining screws/brackets to secure the cooler in place. If you have to tighten several screws, be sure to do them a couple of turns at a time in a cross pattern, so that you don’t put too much pressure on one portion of the CPU. Make sure that they are tight enough that the CPU cannot wiggle around, but don’t overtighten. The motherboard is the most unweildy component in your system, but since it acts as the foundation for everything else in your case, installing it correctly is of paramount importance.
The suggested sequence of which memory slots to be installed first may differ due to different motherboards. Take MSI motherboards as example, you are suggested to insert the memory kit into Dimm1 slot first. Don’t forget to always check the dimensions of the graphics card before purchasing so you can evaluate and see whether or not it’ll fit just right inside the case.
Is This Article Up To Date?
I will make sure to pass along this information about hot to assemble a computer to help him put his new parts together when he gets them. Be careful as there are some items which must be installed in a certain order . Depending on the order of assembly, some parts can get in the way of other parts when trying to mount them, or result in less working space/room inside the case for installing other parts. Whether you choose to build ‘inside the case’ or ‘outside the case’, you can still assemble individual parts in nearly any order you choose. For instance, you could easily switch around steps , or even do what’s called an ‘out of the case’ build. The process we’ve outlined in our computer build infographic is just one of the ways we prefer to build PCs, but there is some flexibility around it.
As such, make sure you do your research prior to making any selection. From there you’ll want to thermal paste if your CPU cooler didn’t come with any pre-applied already. Users will want to squeeze out a small blob, around the size of half a pea, onto the middle of the CPU.
Next, we need to connect the storage drives to the motherboard, using SATA data cables. These are mostly smaller versions of their power siblings that carry data instead. The motherboard usually has SATA ports located to the lower-right hand-side. Much like the power cables, route these through cut-outs and grommets to the drive bays and mounts. The most crucial part to get right is picking parts that do what you want and working with each other. Choosing wrong or incompatible PC parts may cause issues, damage to other components, or require time for returning said products to retailers.
Ensure you have all required tools on hand for easy access. Consider keeping a container nearby to hold loose parts like screws. And sometimes, you build a PC and it just refuses to boot up at the first go. Maybe it’s a SATA cable that has come loose, or perhaps it’s a RAM stick that is not inserted correctly.